Started By
Message

Difficulty of putting Epoxy on concrete floors?

Posted on 7/22/20 at 3:03 pm
Posted by David Puddy
Jena, LA
Member since Nov 2009
116 posts
Posted on 7/22/20 at 3:03 pm
My wife is wanting to an epoxy finish on our concrete floors in our new kitchen. I was concerned about the difficulty of doing this ourselves. Is it a pretty easy process? Is there a good chance that we will mess this up when we are mixing up the chemicals?
Posted by stickly
Asheville, NC
Member since Nov 2012
2338 posts
Posted on 7/22/20 at 3:29 pm to
Epoxy on concrete is notoriously inconsistent, particularly new concrete OR old concrete that has had spills of oils or other contaminants. I would acid stain it a color that your wife likes and then use a sealer like Everclear which is easy to re-coat/repair.
Posted by notsince98
KC, MO
Member since Oct 2012
18098 posts
Posted on 7/22/20 at 3:29 pm to
be sure you are out of the house for a week or so afterward. that stuff is toxic and takes a long time to fully offgas.
Posted by cave canem
pullarius dominus
Member since Oct 2012
12186 posts
Posted on 7/22/20 at 10:14 pm to
It is easy as can be, just clean repeatedly and use an acid wash prior to putting it down.

My only suggestion is buy more than you think you need because they are way off on coverage, otherwise follow the directions on the box.
Posted by jpcajun
Member since Nov 2010
1210 posts
Posted on 7/23/20 at 5:56 pm to
We used to always use Kemiko stains and they came out excellent. After we would stain, we would use a 2-part epoxy designed for floors with a high gloss. We never had an issue with this or it being inconsistent
Posted by Mud_Till_May
Member since Aug 2014
9685 posts
Posted on 7/24/20 at 1:23 am to
Put tile down. Epoxy looks like shite
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram